As you may know, we have been testing the Kavod KVD-15 rifle from Kavod Custom. We have been toying around with the type of case we should use for the rifle, and have decided to go with a Starlight Rifle Case, which has already arrived.
I know, I know… we’ve already tested a few cases from Starlight Cases (see our previous Starlight Case review). You might be asking, why didn’t we try something new? Well, it’s simple… we’ve had great luck with Starlight Cases.
For the KVD-15, we chose Starlight Case model SC-061338 in O.D. Green. I haven’t cut out the foam insert yet, but will post another picture once I do. Of course, we will ultimately do a full review on the case, but until then, be sure to visit the Starlight Cases site.
Starlight Rifle Case Specs:
- Model: SC -061338
- Dimensions: 6″D x 13″W X 38″L
- Weight: 14lbs
- Airtight, Watertight, Chemical Resistant
- Virtually Indestructible
- Pressure Equalization Valve
- High Density Hex-A-Pluk Foam
- Spring Loaded Handle
- Patented Latch-Lock™ System
- O’ring Seal
- Reinforced Molded Holes for Locking
- Stainless Steel Pins
- Unconditional Lifetime Warranty
Kavod Custom KVD-15 Bet Specs:
- Caliber: .223Rem / 5.56mm
- Gas System – Carbine
- Stock: Magpul MOE Carbine (Collapsible)
- Grip: Magpul MOE+ Rubber Coated
- M16 Mil-Spec Bolt Carrier Group, Nickle-Boron (NiB) Coated
- Barrel:
- Material: Stainless Steel
- Barrel Length: 16″
- Barrel Twist Rate: 1:8″
- Rail – Odin Works 15″ Sport
- Trigger Guard: Magpul MOE
- Muzzle Device: A2 Flash hider on 1/2″-28TPI
- Handguard: Odin Works Sport Forend -15.5” Free-Float Rail
- Bravo Company Enhanced Mod3 Charging Handle
- Ambidextrous Sling Mount Plate
- 2 Magpul 30-round Pmags
Midwest Industries SPLP (Same Plane Low Profile) Flip-Up Rear Sight Specs:
- #MCTAR-SPLP
- Sits only .4375” when folded
- Extremely low profile dual aperture design
- Locking detent with large surface area for maximum strength
- Same ball detent battle proven design of #MCTAR-ERS
- Lock detent button with stepped down turns, to provide a surface you can grab onto if your hands are muddy or wet.
- Micro style windage knob featuring the same MOA adjustments as the standard M-16: .65 MOA on M-4 type rifles / .49 MOA on A-4 type rifles
- Made in USA with Lifetime Warranty
Midwest Industries Low Profile Flip-Up Front Sight Specs:
- #MI-LFFR
- Smooth ball bearing pivot detent
- Used standard A2 front sight post
- Automatically lock in the raised position with a locking detent
- Constructed of 6061 aluminum, hard coat anodized to provide a lifetime of service